What's the purpose of these copper coils with resitors inside them in A Yamaha RX-V396RDS amplifier?Looking...
Activating a Alphanet Faucet Wallet Remotely (without tezos-client)
Why do neural networks need so many training examples to perform?
Finding ratio of the area of triangles
How do Japanese speakers determine the implied topic when none has been mentioned?
Connecting top and bottom of adjacent circles
Removing debris from PCB
Find the number of ways to express 1050 as sum of consecutive integers
How to avoid being sexist when trying to employ someone to function in a very sexist environment?
What's the rationale behind the objections to these measures against human trafficking?
Do any poskim exempt 13-20-year-olds from Mussaf?
Am I a Rude Number?
Finding the number of integers that are a square and a cube at the same time
Meaning of すきっとした
Is the theory of the category of topological spaces computable?
If all harmonics are generated by plucking, how does a guitar string produce a pure frequency sound?
How do I add a variable to this curl command?
What is Crew Dragon approaching in this picture?
Why does the DC-9-80 have this cusp in its fuselage?
Do my Windows system binaries contain sensitive information?
Wanted: 5.25 floppy to usb adapter
On what did Lego base the appearance of the new Hogwarts minifigs?
Word to be used for "standing with your toes pointing out"
How to acknowledge an embarrassing job interview, now that I work directly with the interviewer?
Is there a way to help users from having to clicking emails twice before logging into a new sandbox
What's the purpose of these copper coils with resitors inside them in A Yamaha RX-V396RDS amplifier?
Looking for test leads for individual PCB header pins or socket pinsAmplifier damage caused by failed power supply capacitorsAnother 'What is this component?' questionShorting wire from headphonesWhat runs a g-shock watch?Getting rid of electrical noise produced when one touches amplifier and amplifier's dialsArtful Coils: How will changing the shape of coiled wire change the resistance?How can a metal object bond to a live object when not touching anything else?Finding op amp input and output range from datasheetWhat's the purpose of these two diodes in this circuit?
$begingroup$
This is an bit of an overly specific question, but I'm curious about the purpose of these coils inside a Yamaha RX-V396RDS amplifier and wondered if anyone could explain what they're for. They appear on PCB Main 1. Also, would having the realtor inside the coil touching the inside of the coil be likely to cause a channel to not work?
Background to the question: the front right output of the amp has been behaving a littler weirdly for a while, mostly being slightly quieter and less clear than the left, but I've lived with it. This evening I noticed that it had completely cut out, so went delving inside the amp to see if I could spot any loose connections or burnt out components. Nothing looked obviously out of place or broken, but I noticed that on one of the large boards connected to the output board the resistor in one of the copper coils was touching the inside of the coil. I'm no expert, but I assumed that having two components directly touching like that probably wasn't ideal, so I carefully moved it to be more central. Having done that I thought I'd test it out and was surprised to find that the front right speaker was back. I tried to google to find an answer and looked at the schematics, but have no idea of what I did actually fixed things, or if unplugging the amp for the first time in a while may have reset something that had tripped or otherwise gone wonky.
pcb amplifier resistors short-circuit
asked 8 hours ago
andyfaceandyface
1285
New contributor
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
This is an bit of an overly specific question, but I'm curious about the purpose of these coils inside a Yamaha RX-V396RDS amplifier and wondered if anyone could explain what they're for. They appear on PCB Main 1. Also, would having the realtor inside the coil touching the inside of the coil be likely to cause a channel to not work?
Background to the question: the front right output of the amp has been behaving a littler weirdly for a while, mostly being slightly quieter and less clear than the left, but I've lived with it. This evening I noticed that it had completely cut out, so went delving inside the amp to see if I could spot any loose connections or burnt out components. Nothing looked obviously out of place or broken, but I noticed that on one of the large boards connected to the output board the resistor in one of the copper coils was touching the inside of the coil. I'm no expert, but I assumed that having two components directly touching like that probably wasn't ideal, so I carefully moved it to be more central. Having done that I thought I'd test it out and was surprised to find that the front right speaker was back. I tried to google to find an answer and looked at the schematics, but have no idea of what I did actually fixed things, or if unplugging the amp for the first time in a while may have reset something that had tripped or otherwise gone wonky.
pcb amplifier resistors short-circuit
asked 8 hours ago
andyfaceandyface
1285
New contributor
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
1
$begingroup$
If the coil turns touch then the coil is made of enameled wire, and having a resistor lead touch it shouldn't make much difference. Whatever the function of that coil is, it doesn't do much at all at audio frequencies. if it's not there for some sort of cable equalization on the digital signals coming in, I have no clue.
$endgroup$
– TimWescott
8 hours ago
1
$begingroup$
My guess is that they serve some important purpose for the sales and marketing department at Yamaha. They would work even better if they had LEDs inside them for illumination.
$endgroup$
– Elliot Alderson
7 hours ago
$begingroup$
Not a lot of inductance there, but could be to slow down the rectifier surge currents in the power supplies. If you have +-40 volt supplies, from a full wave rectifier, you'd need two. Fast current surges are bad interferers. And copper foil does not shield low-frequency magnetic fields.
$endgroup$
– analogsystemsrf
7 hours ago
add a comment |
$begingroup$
This is an bit of an overly specific question, but I'm curious about the purpose of these coils inside a Yamaha RX-V396RDS amplifier and wondered if anyone could explain what they're for. They appear on PCB Main 1. Also, would having the realtor inside the coil touching the inside of the coil be likely to cause a channel to not work?
Background to the question: the front right output of the amp has been behaving a littler weirdly for a while, mostly being slightly quieter and less clear than the left, but I've lived with it. This evening I noticed that it had completely cut out, so went delving inside the amp to see if I could spot any loose connections or burnt out components. Nothing looked obviously out of place or broken, but I noticed that on one of the large boards connected to the output board the resistor in one of the copper coils was touching the inside of the coil. I'm no expert, but I assumed that having two components directly touching like that probably wasn't ideal, so I carefully moved it to be more central. Having done that I thought I'd test it out and was surprised to find that the front right speaker was back. I tried to google to find an answer and looked at the schematics, but have no idea of what I did actually fixed things, or if unplugging the amp for the first time in a while may have reset something that had tripped or otherwise gone wonky.
pcb amplifier resistors short-circuit
asked 8 hours ago
andyfaceandyface
1285
New contributor
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
This is an bit of an overly specific question, but I'm curious about the purpose of these coils inside a Yamaha RX-V396RDS amplifier and wondered if anyone could explain what they're for. They appear on PCB Main 1. Also, would having the realtor inside the coil touching the inside of the coil be likely to cause a channel to not work?
Background to the question: the front right output of the amp has been behaving a littler weirdly for a while, mostly being slightly quieter and less clear than the left, but I've lived with it. This evening I noticed that it had completely cut out, so went delving inside the amp to see if I could spot any loose connections or burnt out components. Nothing looked obviously out of place or broken, but I noticed that on one of the large boards connected to the output board the resistor in one of the copper coils was touching the inside of the coil. I'm no expert, but I assumed that having two components directly touching like that probably wasn't ideal, so I carefully moved it to be more central. Having done that I thought I'd test it out and was surprised to find that the front right speaker was back. I tried to google to find an answer and looked at the schematics, but have no idea of what I did actually fixed things, or if unplugging the amp for the first time in a while may have reset something that had tripped or otherwise gone wonky.
pcb amplifier resistors short-circuit
pcb amplifier resistors short-circuit
asked 8 hours ago
andyfaceandyface
1285
New contributor
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 8 hours ago
andyfaceandyface
1285
New contributor
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 5 hours ago
andyface
asked 8 hours ago
andyfaceandyface
1285
New contributor
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 8 hours ago
andyfaceandyface
1285
asked 8 hours ago
andyfaceandyface
1285
1285
New contributor
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
andyface is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
1
$begingroup$
If the coil turns touch then the coil is made of enameled wire, and having a resistor lead touch it shouldn't make much difference. Whatever the function of that coil is, it doesn't do much at all at audio frequencies. if it's not there for some sort of cable equalization on the digital signals coming in, I have no clue.
$endgroup$
– TimWescott
8 hours ago
1
$begingroup$
My guess is that they serve some important purpose for the sales and marketing department at Yamaha. They would work even better if they had LEDs inside them for illumination.
$endgroup$
– Elliot Alderson
7 hours ago
$begingroup$
Not a lot of inductance there, but could be to slow down the rectifier surge currents in the power supplies. If you have +-40 volt supplies, from a full wave rectifier, you'd need two. Fast current surges are bad interferers. And copper foil does not shield low-frequency magnetic fields.
$endgroup$
– analogsystemsrf
7 hours ago
add a comment |
1
$begingroup$
If the coil turns touch then the coil is made of enameled wire, and having a resistor lead touch it shouldn't make much difference. Whatever the function of that coil is, it doesn't do much at all at audio frequencies. if it's not there for some sort of cable equalization on the digital signals coming in, I have no clue.
$endgroup$
– TimWescott
8 hours ago
1
$begingroup$
My guess is that they serve some important purpose for the sales and marketing department at Yamaha. They would work even better if they had LEDs inside them for illumination.
$endgroup$
– Elliot Alderson
7 hours ago
$begingroup$
Not a lot of inductance there, but could be to slow down the rectifier surge currents in the power supplies. If you have +-40 volt supplies, from a full wave rectifier, you'd need two. Fast current surges are bad interferers. And copper foil does not shield low-frequency magnetic fields.
$endgroup$
– analogsystemsrf
7 hours ago
1
1
$begingroup$
If the coil turns touch then the coil is made of enameled wire, and having a resistor lead touch it shouldn't make much difference. Whatever the function of that coil is, it doesn't do much at all at audio frequencies. if it's not there for some sort of cable equalization on the digital signals coming in, I have no clue.
$endgroup$
– TimWescott
8 hours ago
$begingroup$
If the coil turns touch then the coil is made of enameled wire, and having a resistor lead touch it shouldn't make much difference. Whatever the function of that coil is, it doesn't do much at all at audio frequencies. if it's not there for some sort of cable equalization on the digital signals coming in, I have no clue.
$endgroup$
– TimWescott
8 hours ago
1
1
$begingroup$
My guess is that they serve some important purpose for the sales and marketing department at Yamaha. They would work even better if they had LEDs inside them for illumination.
$endgroup$
– Elliot Alderson
7 hours ago
$begingroup$
My guess is that they serve some important purpose for the sales and marketing department at Yamaha. They would work even better if they had LEDs inside them for illumination.
$endgroup$
– Elliot Alderson
7 hours ago
$begingroup$
Not a lot of inductance there, but could be to slow down the rectifier surge currents in the power supplies. If you have +-40 volt supplies, from a full wave rectifier, you'd need two. Fast current surges are bad interferers. And copper foil does not shield low-frequency magnetic fields.
$endgroup$
– analogsystemsrf
7 hours ago
$begingroup$
Not a lot of inductance there, but could be to slow down the rectifier surge currents in the power supplies. If you have +-40 volt supplies, from a full wave rectifier, you'd need two. Fast current surges are bad interferers. And copper foil does not shield low-frequency magnetic fields.
$endgroup$
– analogsystemsrf
7 hours ago
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
The coil can be found in service manual schematics. It is an RL filter to isolate the amplifier output circuitry from the speaker terminals.
answered 7 hours ago
JustmeJustme
1,6181310
$endgroup$
1
$begingroup$
So it's just a space saving measure to put the resistor in the middle? or does that do something else too because there looks to be plenty of PCB space.
$endgroup$
– Toor
7 hours ago
$begingroup$
So when "shorted", that channel was oscillating?
$endgroup$
– analogsystemsrf
7 hours ago
1
$begingroup$
..some PCB designer somewhere is loving this attention.
$endgroup$
– Tyler Stone
6 hours ago
1
$begingroup$
They're listed as 1uH coils, and with a quick look at the schematic in the service manual, appear to be there to add stability to the output stage.
$endgroup$
– james
6 hours ago
$begingroup$
Ahh interesting. The schematics I found didn't seem to give too much details. Would the resistor in the centre touching the inside of the coil cause a channel to not work properly?
$endgroup$
– andyface
5 hours ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "135"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
andyface is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f425437%2fwhats-the-purpose-of-these-copper-coils-with-resitors-inside-them-in-a-yamaha-r%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
The coil can be found in service manual schematics. It is an RL filter to isolate the amplifier output circuitry from the speaker terminals.
answered 7 hours ago
JustmeJustme
1,6181310
$endgroup$
1
$begingroup$
So it's just a space saving measure to put the resistor in the middle? or does that do something else too because there looks to be plenty of PCB space.
$endgroup$
– Toor
7 hours ago
$begingroup$
So when "shorted", that channel was oscillating?
$endgroup$
– analogsystemsrf
7 hours ago
1
$begingroup$
..some PCB designer somewhere is loving this attention.
$endgroup$
– Tyler Stone
6 hours ago
1
$begingroup$
They're listed as 1uH coils, and with a quick look at the schematic in the service manual, appear to be there to add stability to the output stage.
$endgroup$
– james
6 hours ago
$begingroup$
Ahh interesting. The schematics I found didn't seem to give too much details. Would the resistor in the centre touching the inside of the coil cause a channel to not work properly?
$endgroup$
– andyface
5 hours ago
add a comment |
$begingroup$
The coil can be found in service manual schematics. It is an RL filter to isolate the amplifier output circuitry from the speaker terminals.
answered 7 hours ago
JustmeJustme
1,6181310
$endgroup$
1
$begingroup$
So it's just a space saving measure to put the resistor in the middle? or does that do something else too because there looks to be plenty of PCB space.
$endgroup$
– Toor
7 hours ago
$begingroup$
So when "shorted", that channel was oscillating?
$endgroup$
– analogsystemsrf
7 hours ago
1
$begingroup$
..some PCB designer somewhere is loving this attention.
$endgroup$
– Tyler Stone
6 hours ago
1
$begingroup$
They're listed as 1uH coils, and with a quick look at the schematic in the service manual, appear to be there to add stability to the output stage.
$endgroup$
– james
6 hours ago
$begingroup$
Ahh interesting. The schematics I found didn't seem to give too much details. Would the resistor in the centre touching the inside of the coil cause a channel to not work properly?
$endgroup$
– andyface
5 hours ago
add a comment |
$begingroup$
The coil can be found in service manual schematics. It is an RL filter to isolate the amplifier output circuitry from the speaker terminals.
answered 7 hours ago
JustmeJustme
1,6181310
$endgroup$
The coil can be found in service manual schematics. It is an RL filter to isolate the amplifier output circuitry from the speaker terminals.
answered 7 hours ago
JustmeJustme
1,6181310
answered 7 hours ago
JustmeJustme
1,6181310
answered 7 hours ago
JustmeJustme
1,6181310
answered 7 hours ago
JustmeJustme
1,6181310
1,6181310
1
$begingroup$
So it's just a space saving measure to put the resistor in the middle? or does that do something else too because there looks to be plenty of PCB space.
$endgroup$
– Toor
7 hours ago
$begingroup$
So when "shorted", that channel was oscillating?
$endgroup$
– analogsystemsrf
7 hours ago
1
$begingroup$
..some PCB designer somewhere is loving this attention.
$endgroup$
– Tyler Stone
6 hours ago
1
$begingroup$
They're listed as 1uH coils, and with a quick look at the schematic in the service manual, appear to be there to add stability to the output stage.
$endgroup$
– james
6 hours ago
$begingroup$
Ahh interesting. The schematics I found didn't seem to give too much details. Would the resistor in the centre touching the inside of the coil cause a channel to not work properly?
$endgroup$
– andyface
5 hours ago
add a comment |
1
$begingroup$
So it's just a space saving measure to put the resistor in the middle? or does that do something else too because there looks to be plenty of PCB space.
$endgroup$
– Toor
7 hours ago
$begingroup$
So when "shorted", that channel was oscillating?
$endgroup$
– analogsystemsrf
7 hours ago
1
$begingroup$
..some PCB designer somewhere is loving this attention.
$endgroup$
– Tyler Stone
6 hours ago
1
$begingroup$
They're listed as 1uH coils, and with a quick look at the schematic in the service manual, appear to be there to add stability to the output stage.
$endgroup$
– james
6 hours ago
$begingroup$
Ahh interesting. The schematics I found didn't seem to give too much details. Would the resistor in the centre touching the inside of the coil cause a channel to not work properly?
$endgroup$
– andyface
5 hours ago
1
1
$begingroup$
So it's just a space saving measure to put the resistor in the middle? or does that do something else too because there looks to be plenty of PCB space.
$endgroup$
– Toor
7 hours ago
$begingroup$
So it's just a space saving measure to put the resistor in the middle? or does that do something else too because there looks to be plenty of PCB space.
$endgroup$
– Toor
7 hours ago
$begingroup$
So when "shorted", that channel was oscillating?
$endgroup$
– analogsystemsrf
7 hours ago
$begingroup$
So when "shorted", that channel was oscillating?
$endgroup$
– analogsystemsrf
7 hours ago
1
1
$begingroup$
..some PCB designer somewhere is loving this attention.
$endgroup$
– Tyler Stone
6 hours ago
$begingroup$
..some PCB designer somewhere is loving this attention.
$endgroup$
– Tyler Stone
6 hours ago
1
1
$begingroup$
They're listed as 1uH coils, and with a quick look at the schematic in the service manual, appear to be there to add stability to the output stage.
$endgroup$
– james
6 hours ago
$begingroup$
They're listed as 1uH coils, and with a quick look at the schematic in the service manual, appear to be there to add stability to the output stage.
$endgroup$
– james
6 hours ago
$begingroup$
Ahh interesting. The schematics I found didn't seem to give too much details. Would the resistor in the centre touching the inside of the coil cause a channel to not work properly?
$endgroup$
– andyface
5 hours ago
$begingroup$
Ahh interesting. The schematics I found didn't seem to give too much details. Would the resistor in the centre touching the inside of the coil cause a channel to not work properly?
$endgroup$
– andyface
5 hours ago
add a comment |
andyface is a new contributor. Be nice, and check out our Code of Conduct.
andyface is a new contributor. Be nice, and check out our Code of Conduct.
andyface is a new contributor. Be nice, and check out our Code of Conduct.
andyface is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f425437%2fwhats-the-purpose-of-these-copper-coils-with-resitors-inside-them-in-a-yamaha-r%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
$begingroup$
If the coil turns touch then the coil is made of enameled wire, and having a resistor lead touch it shouldn't make much difference. Whatever the function of that coil is, it doesn't do much at all at audio frequencies. if it's not there for some sort of cable equalization on the digital signals coming in, I have no clue.
$endgroup$
– TimWescott
8 hours ago
1
$begingroup$
My guess is that they serve some important purpose for the sales and marketing department at Yamaha. They would work even better if they had LEDs inside them for illumination.
$endgroup$
– Elliot Alderson
7 hours ago
$begingroup$
Not a lot of inductance there, but could be to slow down the rectifier surge currents in the power supplies. If you have +-40 volt supplies, from a full wave rectifier, you'd need two. Fast current surges are bad interferers. And copper foil does not shield low-frequency magnetic fields.
$endgroup$
– analogsystemsrf
7 hours ago