Request info on 12/48v PSUDoes the pin order matter for an EPS12V 8-pin +12V connector?DC PSU questions (+/-...
Has any country ever had 2 former presidents in jail simultaneously?
Is it possible to have a strip of cold climate in the middle of a planet?
Aragorn's "guise" in the Orthanc Stone
Did arcade monitors have same pixel aspect ratio as TV sets?
What is this called? Old film camera viewer?
Creature in Shazam mid-credits scene?
Why did the HMS Bounty go back to a time when whales are already rare?
Freedom of speech and where it applies
A social experiment. What is the worst that can happen?
Where did Heinlein say "Once you get to Earth orbit, you're halfway to anywhere in the Solar System"?
Calculating Wattage for Resistor in High Frequency Application?
Is it better practice to read straight from sheet music rather than memorize it?
Why do compilers behave differently when static_cast(ing) a function to void*?
Is there a single word describing earning money through any means?
Drawing ramified coverings with tikz
What is Cash Advance APR?
Should I stop contributing to retirement accounts?
Does a 'pending' US visa application constitute a denial?
Is there a working SACD iso player for Ubuntu?
How should I respond when I lied about my education and the company finds out through background check?
What does chmod -u do?
What is the evidence for the "tyranny of the majority problem" in a direct democracy context?
How can Trident be so inexpensive? Will it orbit Triton or just do a (slow) flyby?
Why do we read the Megillah by night and by day?
Request info on 12/48v PSU
Does the pin order matter for an EPS12V 8-pin +12V connector?DC PSU questions (+/- voltages, home-built ammeter)Current flow priorities in PSU / PSU reviewConnecting potentiometer to an ATX PSUATX power supply only 0.1A from 12V rail?Split External 5V PSU 4 waysNeed help interpreting a printer PS labelCan AC floating ground be used as a common ground to a DC circuit?Has Anyone Ever Gotten a Delta DPS-400AB-5 A PSU to Work Standalone?XBOX 360 PSU for walkie-talkie chargers
$begingroup$
I've got a power supply unit from a defunct/decommissioned Satellite Internet setup, and I'm hoping to get clarification on some of the markings on the label.
In the following picture, there's four pin numbers, followed underneath of pins 1 and 2 both volts and max amps, and pins 3 and 4 simply "RETURN".
My question is whether I'm reading the label correctly. (Technically, I've got a few questions here).
Does max(A) under pin 1 mean that at 12v I've got 2.99A available, and at the 48v pin, I've got a max of 0.82A?
Also, when pins 3 and 4 are reflected as return, I'm assuming that means ground, yes?
I'll summarize my questions here to consolidate:
1) is pin 1 +12v @ 2.99A?
2) is pin 2 +48v @ 0.82A?
3) are pins 3 and 4 ground pins, that could (and potentially should) be wired together if both pin 1 and 2 are in use simultaneously?
Here's the pic of the label of the power supply in question:
power-supply
$endgroup$
add a comment |
$begingroup$
I've got a power supply unit from a defunct/decommissioned Satellite Internet setup, and I'm hoping to get clarification on some of the markings on the label.
In the following picture, there's four pin numbers, followed underneath of pins 1 and 2 both volts and max amps, and pins 3 and 4 simply "RETURN".
My question is whether I'm reading the label correctly. (Technically, I've got a few questions here).
Does max(A) under pin 1 mean that at 12v I've got 2.99A available, and at the 48v pin, I've got a max of 0.82A?
Also, when pins 3 and 4 are reflected as return, I'm assuming that means ground, yes?
I'll summarize my questions here to consolidate:
1) is pin 1 +12v @ 2.99A?
2) is pin 2 +48v @ 0.82A?
3) are pins 3 and 4 ground pins, that could (and potentially should) be wired together if both pin 1 and 2 are in use simultaneously?
Here's the pic of the label of the power supply in question:
power-supply
$endgroup$
2
$begingroup$
To me it seems your interpretation of the label is correct.
$endgroup$
– K. S.
4 hours ago
1
$begingroup$
@K.S. I thought so. It appears obvious, but I thought I'd ask the experts.
$endgroup$
– stevieb
4 hours ago
add a comment |
$begingroup$
I've got a power supply unit from a defunct/decommissioned Satellite Internet setup, and I'm hoping to get clarification on some of the markings on the label.
In the following picture, there's four pin numbers, followed underneath of pins 1 and 2 both volts and max amps, and pins 3 and 4 simply "RETURN".
My question is whether I'm reading the label correctly. (Technically, I've got a few questions here).
Does max(A) under pin 1 mean that at 12v I've got 2.99A available, and at the 48v pin, I've got a max of 0.82A?
Also, when pins 3 and 4 are reflected as return, I'm assuming that means ground, yes?
I'll summarize my questions here to consolidate:
1) is pin 1 +12v @ 2.99A?
2) is pin 2 +48v @ 0.82A?
3) are pins 3 and 4 ground pins, that could (and potentially should) be wired together if both pin 1 and 2 are in use simultaneously?
Here's the pic of the label of the power supply in question:
power-supply
$endgroup$
I've got a power supply unit from a defunct/decommissioned Satellite Internet setup, and I'm hoping to get clarification on some of the markings on the label.
In the following picture, there's four pin numbers, followed underneath of pins 1 and 2 both volts and max amps, and pins 3 and 4 simply "RETURN".
My question is whether I'm reading the label correctly. (Technically, I've got a few questions here).
Does max(A) under pin 1 mean that at 12v I've got 2.99A available, and at the 48v pin, I've got a max of 0.82A?
Also, when pins 3 and 4 are reflected as return, I'm assuming that means ground, yes?
I'll summarize my questions here to consolidate:
1) is pin 1 +12v @ 2.99A?
2) is pin 2 +48v @ 0.82A?
3) are pins 3 and 4 ground pins, that could (and potentially should) be wired together if both pin 1 and 2 are in use simultaneously?
Here's the pic of the label of the power supply in question:
power-supply
power-supply
asked 5 hours ago
steviebstevieb
1265
1265
2
$begingroup$
To me it seems your interpretation of the label is correct.
$endgroup$
– K. S.
4 hours ago
1
$begingroup$
@K.S. I thought so. It appears obvious, but I thought I'd ask the experts.
$endgroup$
– stevieb
4 hours ago
add a comment |
2
$begingroup$
To me it seems your interpretation of the label is correct.
$endgroup$
– K. S.
4 hours ago
1
$begingroup$
@K.S. I thought so. It appears obvious, but I thought I'd ask the experts.
$endgroup$
– stevieb
4 hours ago
2
2
$begingroup$
To me it seems your interpretation of the label is correct.
$endgroup$
– K. S.
4 hours ago
$begingroup$
To me it seems your interpretation of the label is correct.
$endgroup$
– K. S.
4 hours ago
1
1
$begingroup$
@K.S. I thought so. It appears obvious, but I thought I'd ask the experts.
$endgroup$
– stevieb
4 hours ago
$begingroup$
@K.S. I thought so. It appears obvious, but I thought I'd ask the experts.
$endgroup$
– stevieb
4 hours ago
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
Yes, your interpretation of the label is correct as far as I can tell.
Note also that $12 mathrm{V}·2.99 mathrm{A} + 48 mathrm{V}·0.82 mathrm{A} = 75.24 mathrm{W}$, in agreement with the 75 W power rating. This, combined with how simple this interpretation of the markings is, is sufficient evidence for me to say with confidence that you are correct.
simulate this circuit – Schematic created using CircuitLab
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "135"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f428753%2frequest-info-on-12-48v-psu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Yes, your interpretation of the label is correct as far as I can tell.
Note also that $12 mathrm{V}·2.99 mathrm{A} + 48 mathrm{V}·0.82 mathrm{A} = 75.24 mathrm{W}$, in agreement with the 75 W power rating. This, combined with how simple this interpretation of the markings is, is sufficient evidence for me to say with confidence that you are correct.
simulate this circuit – Schematic created using CircuitLab
$endgroup$
add a comment |
$begingroup$
Yes, your interpretation of the label is correct as far as I can tell.
Note also that $12 mathrm{V}·2.99 mathrm{A} + 48 mathrm{V}·0.82 mathrm{A} = 75.24 mathrm{W}$, in agreement with the 75 W power rating. This, combined with how simple this interpretation of the markings is, is sufficient evidence for me to say with confidence that you are correct.
simulate this circuit – Schematic created using CircuitLab
$endgroup$
add a comment |
$begingroup$
Yes, your interpretation of the label is correct as far as I can tell.
Note also that $12 mathrm{V}·2.99 mathrm{A} + 48 mathrm{V}·0.82 mathrm{A} = 75.24 mathrm{W}$, in agreement with the 75 W power rating. This, combined with how simple this interpretation of the markings is, is sufficient evidence for me to say with confidence that you are correct.
simulate this circuit – Schematic created using CircuitLab
$endgroup$
Yes, your interpretation of the label is correct as far as I can tell.
Note also that $12 mathrm{V}·2.99 mathrm{A} + 48 mathrm{V}·0.82 mathrm{A} = 75.24 mathrm{W}$, in agreement with the 75 W power rating. This, combined with how simple this interpretation of the markings is, is sufficient evidence for me to say with confidence that you are correct.
simulate this circuit – Schematic created using CircuitLab
edited 3 hours ago
Jasen
11.4k1531
11.4k1531
answered 4 hours ago
HearthHearth
4,6601137
4,6601137
add a comment |
add a comment |
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f428753%2frequest-info-on-12-48v-psu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
$begingroup$
To me it seems your interpretation of the label is correct.
$endgroup$
– K. S.
4 hours ago
1
$begingroup$
@K.S. I thought so. It appears obvious, but I thought I'd ask the experts.
$endgroup$
– stevieb
4 hours ago